Previous page

Bronco II Stables

Next Page

 
Woody's '96 Ranger

4x4, extended cab, 4.0, Auto tranny, Electric T-Case and auto hubs. 3.73LS rear and 3.73 front gears.

This is page 4 of the stables

Welcome

Scotty B's '88 Bronco II

It's running a 2.9L motor with a 5 speed manual transmission. Sporting a 3" Body Lift by Performance Body Lifts and also has a 4.5" Suspension Lift by Rough Country, Heckethorne Hydro 8000 shocks & Springs. 33x12.50 Super Swampers.

 
Navy Rick's '93 Ranger STX

4x4, 4.0L, Custom front reciever bumper, Warn manual hubs, Flowmaster 40 series exhaust, Rhino Liner bedliner, JD stage II lift, 15"x8" Outlaw I Wheels, 32"x11.50" BFG Mud Terrains.

 
Ben Hart's '88 Bronco II

I painted this '88 BII Chrome Yellow. It has a 3.5" suspension lift and 2" body lift. It also has headers, flowmaster muffler, and dual exhaust. It sits on Pro Comp 32s, with 4.10 gears!

BOSSBOB's '87 Bronco II

4 inch Skyjacker and a 3 inch body lift. Runing 35X12.50X15 Procomp Mud Tires and powered with a 2.9L bored 40 over with an Engle Cam and a low end power chip. Chopped top with the glass and top of the rear hatch used on the back of the cab. The lower part of the hatch was used as a tailgate.

 
Tony Raine's '84 Bronco II

7 inches of total lift, 33x12.5 Generals, bored out motor, and duraspark conversion.

 
MisfitsOwnJoo's '85 Bronco II XLS

Metallic Black, 2.8L V6, 4.10 gears front and rear, 3" body lift from Performance Accesories ,XLS body kit, 30"x10.5"x15" Toyo Open Country A/T tires, chrome wheels. All windows tinted. Magna Flow "V Force" Exhaust.

Username Required's '90 Bronco II

K&N filter, Flowmaster 40 series (single pipe), Hypertech chip, Centerforce Dual Friction clutch, Ford Racing 9mm blue plug wires, Dayton 30X9.5X15 TIMBERLINE, M/T Tires, Alpine CD/MP3 player, MEMPHIS components, amps & subs.

 
Joebroncotrucks' '84 Bronco II

4.5" Superlift, 15X8 wheels w/32" MT tires, 4.56:1 gears, front Dana Trac-Lok LSD, rear Detroit Locker, custom dual exhaust, a pushbar with Hella fog lights, Bushwaker fender flares, CB radio, Autometer tach, and a clinometer.

 
Swampbronc's '89 Bronco II

2wd=>4wd. Q78 Super Swampers, 3" bodylift, 3" JD lift, D35 w/warn hubs, 8.8 w/lockright, 4.10 gears. BW1350 t-case. Fenders tucked. ECM relocated, raised intake w/K&N.

1987bronco2's '87 Bronco II

4 inch Rough Country suspension lift and 30x9.50 A/T tires. I'm running 4.10 gears and a 2inch add-a-leaf in the rear.

 
Jesusno2's '90 Bronco II XLT

Trimmed fenders, 31x10.5's, black steel wheels. Click image for slide show.

 
SARGE's '91 Explorer Eddie Bauer

"XXX"
Custom bumpers w/Warn 8000 winch, dash mounted controls, Auburn locker in the back, Warn manual hubs, Homestyle snorkle, 6" VMS suspension lift, Duff long arms, SOA Rear w/F150 mains, AKBII crossmember, & 32x11.50 Swamper SSR's.

Mage's '85 Bronco II

4x4, X leafs in back, off road light in front (the other was destoryed LOL), 30in tires on X rims. Currently with no front end or doors. Lots to fix. Fenders are cut out too. This is it before I started messing with it, save the tires (30in I belive) and the offroad lights.

 
If you want your Rig added to the Stables, please post to THIS THREAD. Please include your member name, a picture no wider then 250 pixels, and your Rig's Spec's/Description in less then 300 charactors.  If you send us a link to your WebPage we will include that as well.  Your picture will be a link to your WebPage.
 
Previous page Bronco II Stables Quick Navigation
Just click on the Stable page you want to go to.

1  2  3  5  6  7  8  9  10  11
12  13  14  15  16  17  18  19

You are now on page 4

Click here to return to the
Broncoii.org Home Page
.

Next Page