|
|
Bronco II Stables
|
|
|
|
|
oneil50302's
'89 Bronco II
skyjacker lift 5 inch front 7 inches in back. 31
venture mts, custom air intake, 3.73 soon to have 4.56. 87 tb, powertrax
locker in rear. custom flowmaster 44 champion 8000lb winch. also soon to
get 33x15.50r15 superswamper tsl sx.
|
|
|
This is page 18 of
the stables
Welcome
|
|
|
|
scooter141's
'89 Bronco II Eddie Bauer
"Dirt wolf" - T.O.T.M. September '07.
5.0 L V-8 EFI,
roller motor, C-6 Transmission, N.P.205 T-case w/twin stick, 37 X 13.00
X 15 Boggers, 9" 31 spline full width w/ Spool, Dana 44 high pinion full
width w/Detroit Locker, 14" King Air shocks on the front, Extended radius
arms w/ 1 1/4 Johnny Joints, 4 wheel disk brakes.
Photo Album
|
|
|
|
|
Mr.Steven's
'90 Bronco II
"Lil' Blue 2"
2.9 liter V6, 5-speed, 4x4 with
auto hubs and low range. Bone stock drivetrain and suspension.
30x9.5x15 BFG All Terrains on ProComp Rock Crawler wheels.
Considering a 3 inch body lift and 31s. New CD player.
|
|
|
|
|
FIREZAPPER's
'93 Explorer Sport
"Purple Haze"
FW1977 HP Dana 44 spooled.
FW 8,8 welded. Gears 513's WH 5.5 coils stock 4 door rear leafs
with an AAL. Wristed arm set-up, 48" lowers and flex joint. Stock
4.0, 5 speed, Stubbler, 1354m. Cut down 4 door rear drive shaft
front and rear. 36 TSL's front and 37 Boggers rear. BBP cage and
sliders.
|
|
|
|
Fordy_Styles'
'88 Bronco II XLT
2WD, 3-speed with overdrive. Stock Ford 7.5” rear end,
with 4:10 gears posi-trac. 2.9L V6, stock with Dynomax exhaust. Possibly
swapping in 4WD gear in the future.
|
|
|
|
|
4x4freak's
'86 Bronco II XLT
4x4, 2.9, auto, completely stock as of now.
|
|
|
|
|
Jesús Treviño's
'85 Bronco II XLT
"La Acostada"
Pretty stock, only removed stabilizers
and it flexs very well, even better than stock jeeps haha. Go wheeling a
lot with it, tons of fun and Ford Power! Gets used for the most hardcore
trails that a stock vehicle can handle. Rolled it once, no major damages
(1 cracked window and minor scratches).
|
|
|
|
bigbillybronco's
'89 Bronco II XLT
2.9 Auto, Bone Stock.
|
|
|
|
|
Bronco351's
'89 Bronco II Eddie Bauer
All stock as of now, 289 swap in April. Soon to follow
D35/8.8 and 4" lift.
|
|
|
|
|
gary65's
'88 Bronco II XLT
2in lift, 2.9 efi.
|
|
|
|
Crazy_bronco_2's
'86 Bronco II
Rebuilt 2.9L, Automatic, Dana 28 4.10 gears,
7.5 rear 4.10 gears and a L/S.
|
|
|
|
|
fordtrucksj's
'89 Bronco II
2.9 Recon. FM 146 JBA headers/wires Accell coil/injectors
Centerforce clutch/TOB Dana 35/8.8/Auburn/4:10. Atlas 3.8 Tcase. JD:Stage 3
susp, HD Trac bars/dual shocks/pitman arm/bumpers/2" body lift. Master Craft
seats. Cardone steering gear box/pump/distributor. Custom drive
shafts. Jet power chip.
|
|
|
|
|
b2redneck's
'85 Bronco II Eddie Bauer
2.8L V6, 4x4, 5spd manual, mostly stock; suspension mods:
3" rear blocks; 1.5 - 2" leveling coils (Rough Country)
|
|
|
|
nosfanatic2006's
'89 Bronco II
"Sandy"
Completely stock. 2.9L V6 with a 5 speed, manual locking hubs,
manual 4wd. Future plans include a 4" lift, trimmed fenders, 33"
bfg mud tarrains, custom exhaust and cold air intake, then
whatever comes up after that.
|
|
|
|
If you want your Rig added to the
Stables, please post to THIS THREAD. Please include your member
name, a picture no wider then 250 pixels, and your Rig's
Spec's/Description in less then 300 charactors. If you
send us a link to your WebPage we will include that as well.
Your picture will be a link to your WebPage.
|
|
|
|
|
Bronco II Stables Quick Navigation
Just click on the Stable page you want to go to.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
19
You are now on page 18
Click here to return to the
Broncoii.org Home Page.
|
|
|